Call us at:  800-762-4999 (7:00 to 4:30 PT)

International calls 1-310-784-5300

Contact us

Control Systems

Control Power Options Description
BRIC 115V / 220V

The Binary Reciprocal intelligent Control System, nicknamed "The BRIC," is the industry's first microprocessor-based control device designed for precision setting of multiple masking presets, elimination of multiple controllers for a single screen, and eliminates the setup time required by existing analog controllers.

Cima Standard Control 115V / 220V

STI-100 is a contact closer or screen trigger device. The STI-100 easily connects to any third party control system. 

Cima-Link Infrared Package 115V / 220V

The IR package includes the Cima-Link Control, modular plug-in infrared (IR) sensor and held held (IR) transmitter.

Cima-Link Serial RS-232 Package 115V / 220V

The Serial RS-232 package includes the Cima-Link Control and RS-232 serial converter (IBT-100). The serial control is used to connect to a computer or other 3rd party control systems.

Cima-Link Ethernet Package 115V / 220V

The Ethernet package includes the Cima-Link Control and the IP device (eNode) which is a modem for IP connectivity. This option can be used for controlling multiple Cima ElectriScreens over IP connections.

Dual Channel Infrared-IMC 115V / 220V

2 IMC controls, with eye sensor and one hand held transmitter, permitting independent IR control of two motors. These are used with motorized masking systems.

High Voltage Wall Switch 115V / 220V

This is your basic three position latched high voltage toggle wall switch.

IRR-K 115V / 220V

This is the IR kit that plugs into a standard SF Low Voltage Controller.

Infrared Remote (IRR) 115V / 220V

The IRR is an Infrared Low Voltage Control (LVC). System includes modular, plug in infrared (IR) sensor and hand held transmitter. 

Intelligent Motor Control (IMC) 115V / 220V

The Intelligent Motor Control IMC-100 is a state of the art AC motor control for projection screens and masking panels. Its small size allows easy mounting in electrical junction boxes and tight locations.

Low Voltage Control w/ Wall Switch (LVC) 115V / 220V

Low voltage screen control (includes optional wall switch) will allow for switching conductors to be run in Class II (small wire, exposed, no conduit), and will interface with most outboard video switching systems.

Multi Option Screen Trigger (MOST) 115V / 220V

Add on screen trigger controller for the LVC or IRR. When combined with a Low Voltage Control, the user will achieve automatic selective switching between projector, wall switch, IR transmitter, or any other 3rd party integrated system controller that is connected to the switch input of the LVC.

Screen Trigger Interface (STI) 115V / 220V

The Stewart Filmscreen Screen Trigger Interface is a factory installed triggering device that has been designed specifically for the Stewart ElectriScreen motors. 

Stewart Standard Control 110V Only

The Stewart Standard Control includes a control board (IMC-100C), keypad, and RJ25 connector cord.The control is an internal AC motor controller designed to control your ElectriScreen projection screen. It can be intergrated with an optional infrared remote, additional ElectriScreens ,or 3rd party control systems. 

Stewart Standard RS-232 Package 110V Only

The Serial RS-232 package includes the RS-232 serial converter (IBT-100) with a 4" patch cord. The serial control is used to connect to a computer or other 3rd party control systems. The Stewart Standard Control is required to use this option.

Stewart Standard Ethernet Package 110V Only

The Ethernet package includes a 4" patch cord and the IP drvice (eNode) which is a modem for IP connectivity. This option can be used for controlling multiple ElectriScreens over IP connections. The Stewart Standard Control is required to use this option.

Stewart Standard Infrared Remote (IRR) 110V Only

The IR kit includes the modular plug-in infrared (IR) sensor and hand held (IR) transmitter. The Stewart Standard Control is required to use the IR kit.  

Video Interface Control System (VICS) 115V / 220V

VICS is a external verion of the STI. It interfaces with the triggering outputs from projectors, receivers, or other 3rd party control systems. 

Wireless Remote Control (WRC) 115V / 220V

This kit uses radio frequency (RF) signals to control an external receiver that is connected to the screen's motor leads and plugs directly into a standard AC outlet. Up, down, and stop functions.

Don't see what you're looking for? Call us @ 1 310 784 5300