Call us at:  800-762-4999 (7:00 to 4:30 PT)

International calls 1-310-784-5300

Contact us

Cable Climber for Large Venues

The Cable Climber screen offers a unique electric screen for permanent installations with high ceilings and sizes up to 16 feet in image width. 

FEATURES:
• Electronically controlled
• Available with all Stewart's flexible materials
• For larger sizes consult factory
• Screen housing consists of aluminum and fire retardant Sintra construction
• Choose from a variety of Stewart’s front or rear projection screen materials
• Proprietary Tab-Guy™ tensioning system ensures a smooth flat viewing surface
• Matte black over-scan border provides for a perfectly masked image area
• Excellent for use where high ceilings may be a concern
• Available in 110V and 220V models

Read more

The Cable Climber screen offers a unique electric screen solution for permanent installations with high ceilings. When operating the Cable Climber, a motorized mechanism automatically descends containing the actual projection screen housing. After completely descending, the Cable Climber activates the motor within the projection screen housing allowing the viewing surface to deploy for a convenient and trouble-free presentation. Each Cable Climber is individually designed and built to order based on the particular room and application. Factory engineer consultation is required before specifying.

Screen Material Quick Reference Guide

Front Projection

Material Name Gain Half Gain Color Description
SnoMatte 100 1.0 Full Lambertian Diffuser White

SnoMatte 100 is a flexible, front projection, matte-white screen formulated to meet the strictest color and white field uniformity standards.

UltraMatte 130 1.3 80 Degrees White

UltraMatte 130 is a flexible, front projection, screen material that is formulated for high output broadcast quality projection systems. 
 

UltraMatte 150 1.5 61 Degrees White

UltraMatte 150 is a flexible, front projection, screen material that is formulated for use in large format applications or when a projector limitation requires a little more punch. 

GrayHawk® 0.9 77 Degrees Gray

GrayHawk is an innovative, front projection, screen surface designed to maximize the performance of today’s 1080p technology. The fourth generation GrayHawk, ultra-fine, optical coating improves uniformity for consistent brightness across the entire screen. 

GrayMatte 70 0.7 Full Lambertian Diffuser Gray

GrayMatte 70 is a flexible, front projection, screen material formulated for use in front projection, edge-blending applications.

Rear Projection

Material Name Gain Half Gain Color Description
AeroView 100 1.0 63 Degrees Off-White

AeroView 100 is a flexible, rear projection, screen material formulated to provide excellent white field uniformity. The AeroView 100 performs superbly in environments where ambient light can be controlled and is appropriate for wider viewing angles.

FilmScreen 100 1.0 39 Degrees Gray

FilmScreen 100 is a flexible, rear projection, screen material formulated with a neutral density gray tint for enhanced contrast. FilmScreen 100 offers a very wide viewing angle for a contrast enhanced material and works well in short throw projection light paths.

LumiFlex 130 1.3 42 Degrees Off-White

LumiFlex 130 is a flexible, rear projection, screen material formulated at a higher gain and is appropriate for larger screen sizes or low output projectors. LumiFlex 130 offers excellent white field uniformity, has a gain factor 30% above unity, and delivers a lot of energy.

Standard Controls

Control Power Options Description
Screen Trigger Interface (STI) 115V / 220V

The Stewart Filmscreen Screen Trigger Interface is a factory installed triggering device that has been designed specifically for the Stewart ElectriScreen motors. 

Video Interface Control System (VICS) 115V / 220V

VICS is a external verion of the STI. It interfaces with the triggering outputs from projectors, receivers, or other 3rd party control systems. 

Optional Controls

Control Power Options Description
Screen Trigger Interface (STI) 115V / 220V

The Stewart Filmscreen Screen Trigger Interface is a factory installed triggering device that has been designed specifically for the Stewart ElectriScreen motors. 

Video Interface Control System (VICS) 115V / 220V

VICS is a external verion of the STI. It interfaces with the triggering outputs from projectors, receivers, or other 3rd party control systems. 

CSI-Specifications

Documents

Don't see what you're looking for? Call us @ 1 310 784 5300