Call us at:  800-762-4999 (7:00 to 4:30 PT)

International calls 1-310-784-5300

Contact us

Cable Climber for Worship

The Cable Climber screen offers a unque electric screen for permanent installations with high ceilings. 

FEATURES:

• Electronically controlled
• Available with all Stewart's flexible materials
• For larger sizes consult factory
• Screen housing consists of aluminum and fire retardant Sintra construction
• Choose from a variety of Stewart’s front or rear projection screen materials
• Proprietary Tab-Guy™ tensioning system ensures a smooth flat viewing surface
• Matte black over-scan border provides for a perfectly masked image area
• Excellent for use where high ceilings may be a concern
• Available in 110V and 220V models

Read more

The Cable Climber screen offers a unique electric screen solution for permanent installations with high ceilings. When operating the Cable Climber, a motorized mechanism automatically descends containing the actual projection screen housing. After completely descending, the Cable Climber activates the motor within the projection screen housing allowing the viewing surface to deploy for a convenient and trouble-free presentation. Each Cable Climber is individually designed and built to order based on the particular room and application. Factory engineer consultation is required before specifying.

Screen Material Quick Reference Guide

Front Projection

Material Name Gain Half Gain Color Description
GrayMatte 70 0.7 Full Lambertian Diffuser Gray

GrayMatte 70 is a flexible, front projection, screen material formulated for use in front projection, edge-blending applications.

GrayHawk® 0.9 77 Degrees Gray

GrayHawk is an innovative, front projection, screen surface designed to maximize the performance of today’s 1080p technology. The fourth generation GrayHawk, ultra-fine, optical coating improves uniformity for consistent brightness across the entire screen. 

FireHawk® 1.1 35 Degrees Gray

FireHawk, in its fourth generation, is a flexible, front projection, screen surface engineered for use with today’s high-powered projection technology in applications involving the presence of ambient light. 

Rear Projection

Material Name Gain Half Gain Color Description
FilmScreen 100 1.0 39 Degrees Gray

FilmScreen 100 is a flexible, rear projection, screen material formulated with a neutral density gray tint for enhanced contrast. FilmScreen 100 offers a very wide viewing angle for a contrast enhanced material and works well in short throw projection light paths.

Standard Controls

Control Power Options Description
Low Voltage Control w/ Wall Switch (LVC) 115V / 220V

Low voltage screen control (includes optional wall switch) will allow for switching conductors to be run in Class II (small wire, exposed, no conduit), and will interface with most outboard video switching systems.

Optional Controls

Control Power Options Description
IRR-K 115V / 220V

This is the IR kit that plugs into a standard SF Low Voltage Controller.

Infrared Remote (IRR) 115V / 220V

The IRR is an Infrared Low Voltage Control (LVC). System includes modular, plug in infrared (IR) sensor and hand held transmitter. 

Multi Option Screen Trigger (MOST) 115V / 220V

Add on screen trigger controller for the LVC or IRR. When combined with a Low Voltage Control, the user will achieve automatic selective switching between projector, wall switch, IR transmitter, or any other 3rd party integrated system controller that is connected to the switch input of the LVC.

Video Interface Control System (VICS) 115V / 220V

VICS is a external verion of the STI. It interfaces with the triggering outputs from projectors, receivers, or other 3rd party control systems. 

Wireless Remote Control (WRC) 115V / 220V

This kit uses radio frequency (RF) signals to control an external receiver that is connected to the screen's motor leads and plugs directly into a standard AC outlet. Up, down, and stop functions.

CSI-Specifications

Documents

Don't see what you're looking for? Call us @ 1 310 784 5300